C93500 Centrifugal Casting Bronze Bearing Bushings

C93500 Centrifugal Casting Bronze Bearing Bushings

High-Performance Self-Lubricating Bronze Bushing Solutions & Technologies. Minimize downtime, extend service life, and reduce costs for dynamic applications.

Technical Report: C93500 Centrifugal Casting Bronze Bearing Bushings

1. Introduction to C93500 Alloy

C93500, also known as High-Leaded Tin Bronze or SAE 66, is a copper-based alloy specifically engineered for bearing and bushing applications . It is characterized by its high lead content, which provides excellent self-lubricating properties and anti-seizing characteristics, making it ideal for high-speed, light-load environments . When produced via centrifugal casting, the alloy’s performance is further enhanced through superior metallurgical integrity, ensuring a refined grain structure and minimal porosity .

2. Chemical Composition

The chemical composition of C93500 is strictly controlled to ensure the desired balance of strength, ductility, and lubricity. The presence of lead (Pb) acts as a solid lubricant, while tin (Sn) provides the necessary strength and corrosion resistance .
Element
Minimum (%)
Maximum (%)
Copper (Cu)
83.0
86.0
Lead (Pb)
8.0
10.0
Tin (Sn)
4.3
6.0
Zinc (Zn)
–
2.0
Iron (Fe)
–
0.20
Nickel (Ni)
–
1.0
Antimony (Sb)
–
0.30
Phosphorus (P)
–
0.05
Sulfur (S)
–
0.08
Aluminum (Al)
–
0.005
Silicon (Si)
–
0.005
Note: In determining Copper (Cu) minimum, it may be calculated as Cu + Ni. For continuous castings, Phosphorus (P) may be up to 1.5% max .

3. Mechanical Properties

The mechanical properties of C93500 vary slightly depending on the casting method. Centrifugal casting typically yields higher density and better grain structure compared to sand casting .
Property
Value (As Centrifugal Cast)
Tensile Strength
28 ksi (193 MPa) min
Yield Strength (0.5% Ext)
12 ksi (83 MPa) min
Elongation (in 2 inches)
15% min
Brinell Hardness (500 kg)
60 (Typical)
Machinability Rating
70 (Excellent)
Density
0.320 lb/in³ at 68°F

4. Centrifugal Casting Process

The centrifugal casting process involves pouring molten C93500 bronze into a rapidly rotating cylindrical mold. The centrifugal force (typically ranging from 20g to 100g) pushes the molten metal against the mold wall .

Key Advantages for Bearing Bushings:

•Refined Grain Structure: The rapid cooling and high pressure result in a fine, uniform grain structure, which improves wear resistance and fatigue life .
•Impurity Removal: Lighter impurities, such as slag and gas, are forced toward the inner diameter (ID) of the bushing, where they can be easily removed during the final machining process .
•High Density: The process eliminates common casting defects like porosity and shrinkage cavities, ensuring a pressure-tight component .
•Dimensional Accuracy: Centrifugal casting allows for the production of near-net-shape bushings, reducing material waste and machining time .

5. Applications and Use Cases

C93500 centrifugal cast bushings are widely used in industries where reliability and low friction are paramount .
•Industrial Machinery: High-speed, light-load bushings, pump impellers, and corrosion-resistant components.
•Marine: Bearings for shafts and pumps exposed to brackish water or mild chemicals.
•General Engineering: Small bearings and bushings requiring excellent machinability and anti-friction properties.

6. Manufacturing Standards

C93500 centrifugal castings are typically manufactured in accordance with the following international standards :
•ASTM B271: Standard Specification for Copper-Base Alloy Centrifugal Castings.
•SAE J461/J462: Wrought and Cast Copper Alloys.
•UNS C93500: Unified Numbering System for Metals and Alloys.

Metal Bushing (Lubricated Metal) -Self-Lubricating Bushing Materials

Bushings are specialized, self-lubricating metal components widely utilized across various industries due to their durability and low maintenance requirements. Self-lubricating metal bushings are engineered to function without additional lubrication in numerous applications, thereby minimizing maintenance needs. These bushings are available in various series and configurations, such as flanged bushings and split bearings, to meet specific application requirements.

Metal-Polymer Anti-Friction Plain Bearings

Metal-Polymer Composite Self-lubricating Bushing Material

Steel Back + Porous Bronze Sinter + PTFE

Metal-Polymer Plain Bearings Grease Lubricated
Metal-Polymer Plain Bearings Grease Lubricated
Bronze Bearings made of CuSn8 with Lubrication Indents
Bronze Bearings and Bronze Sleeve Bushings made of CuSn8 with Lubrication Indents
Cast Bronze Bushings with Solid Lubricant Inserts
Cast Bronze Bearings with Solid Lubricant Inserts
Bimetal Plain Bearings
Steel + CuPb10Sn10 with indents
Steel Bronze Bushing
Steel Backing and Bronze Overlay
Compare prices and delivery times, then place your order directly online or request a quotation.

lubrication-free Bearing bushing products

Self-lubricating Bushing For High Performance And Low Maintenance