CuAl10Fe5Ni5
CuAl10Fe5Ni5
High-Performance Self-Lubricating Bronze Bushing Solutions & Technologies. Minimize downtime, extend service life, and reduce costs for dynamic applications.
Unveiling the Durability of CuAl10Fe5Ni5 Aluminium Bronze in Marine Environments, Nickel-Aluminum Bronze Bearings, Bronze Bearings Sleeve and Plain Bearing, CuAl10Fe5Ni5,CuAl10Ni5Fe4 C63000 – CuAl10Ni5Fe4 – Nickel Aluminum Bronze
Plug Graphite Wear Plate
Bronze Wear Plates and Plug Graphite Bearings: Mastering Heavy Forces with Precision
Overview of Copper-Based Alloy with Aluminium: Characteristics and Standards
This copper-based alloy features aluminium as its principal element, with significant additions of iron and nickel, resulting in an extremely hard and tough material. It exhibits exceptional static and dynamic load resistance, with excellent performance in marine environments due to its resistance to seawater corrosion and erosion. Additionally, it maintains good performance at high temperatures. The closest international standard for this alloy is ASTM B505 C95500.
| Chemical Composition mass/% | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cu | Sn | Al | Fe | Mn | Ni | Pb | Si | P | Zn |
| 76.0-83.0 | 0.1 | 8.5-10.5 | 4.0-5.5 | 3 | 4.0-6.0 | 0.03 | 0.1 | – | 0.5 |
| Mechanical properties | |||
|---|---|---|---|
| Tensile strength Mpa(Min) | Yield strength MPa(Min) | Elongation % | Brinell hardness(HB) |
| 650 | 280 | 13 | 150 |
Note：
1、In Chemical Composition, Single values represent maximums.
2、Mechanical performance of hardness value is only for reference.
Chemical Composition
The alloy consists of several elements within specific ranges to ensure its robust properties:
- Aluminum (Al): 8.5% minimum, 10.5% maximum
- Copper (Cu): 76.0% minimum, 83.0% maximum
- Iron (Fe): 4.0% minimum, 5.5% maximum
- Nickel (Ni): 4.0% minimum, 6.0% maximum
Trace elements include:
- Manganese (Mn): up to 3.0%
- Bismuth (Bi): up to 0.01%
- Chromium (Cr): up to 0.05%
- Magnesium (Mg): up to 0.05%
- Lead (Pb): up to 0.03%
- Silicon (Si): up to 0.1%
- Tin (Sn): up to 0.1%
- Zinc (Zn): up to 0.50%
Mechanical Properties (Minimum Values)
The mechanical properties differ based on the molding process but maintain high standards in terms of strength and ductility:
- Tensile Strength (Rm): 650 MPa for both Continuous (GC)1 and Centrifugal (GZ) processes
- Yield Point (0.2% Rp0.2): 280 MPa for both processes
- Elongation (5D): 13% for both processes
- Hardness (HBW 10-1000): 150 for both processes
Note: The continuous process applies for pieces with an exterior diameter of ≤ 300 mm. For larger sizes, values are agreed upon with the order.
Physical Properties
- Density: 7.6 kg/dm³
- Specific Heat: 0.418 J/(g*K)
- Thermal Expansion: 17 to 19 (10^-6 k)
- Thermal Conductivity: 60 W/(m*K)
- Electrical Conductivity: 4 to 6 MS/m
This copper-aluminium alloy is designed to meet rigorous industrial requirements, ensuring durability and efficiency in applications requiring high strength and corrosion resistance.
Overview of Copper-Based Alloy with Aluminium: Characteristics and Standards
This copper-based alloy features aluminium as its principal element, with significant additions of iron and nickel, resulting in an extremely hard and tough material. It exhibits exceptional static and dynamic load resistance, with excellent performance in marine environments due to its resistance to seawater corrosion and erosion. Additionally, it maintains good performance at high temperatures. The closest international standard for this alloy is ASTM B505 C95500.
Chemical Composition
The alloy consists of several elements within specific ranges to ensure its robust properties:
- Aluminum (Al): 8.5% minimum, 10.5% maximum
- Copper (Cu): 76.0% minimum, 83.0% maximum
- Iron (Fe): 4.0% minimum, 5.5% maximum
- Nickel (Ni): 4.0% minimum, 6.0% maximum
Trace elements include:
- Manganese (Mn): up to 3.0%
- Bismuth (Bi): up to 0.01%
- Chromium (Cr): up to 0.05%
- Magnesium (Mg): up to 0.05%
- Lead (Pb): up to 0.03%
- Silicon (Si): up to 0.1%
- Tin (Sn): up to 0.1%
- Zinc (Zn): up to 0.50%
Mechanical Properties (Minimum Values)
The mechanical properties differ based on the molding process but maintain high standards in terms of strength and ductility:
- Tensile Strength (Rm): 650 MPa for both Continuous (GC)1 and Centrifugal (GZ) processes
- Yield Point (0.2% Rp0.2): 280 MPa for both processes
- Elongation (5D): 13% for both processes
- Hardness (HBW 10-1000): 150 for both processes
Note: The continuous process applies for pieces with an exterior diameter of ≤ 300 mm. For larger sizes, values are agreed upon with the order.
Physical Properties
- Density: 7.6 kg/dm³
- Specific Heat: 0.418 J/(g*K)
- Thermal Expansion: 17 to 19 (10^-6 k)
- Thermal Conductivity: 60 W/(m*K)
- Electrical Conductivity: 4 to 6 MS/m
This copper-aluminium alloy is designed to meet rigorous industrial requirements, ensuring durability and efficiency in applications requiring high strength and corrosion resistance.
Metal Bushing (Lubricated Metal) -Self-Lubricating Bushing Materials
Bushings are specialized, self-lubricating metal components widely utilized across various industries due to their durability and low maintenance requirements. Self-lubricating metal bushings are engineered to function without additional lubrication in numerous applications, thereby minimizing maintenance needs. These bushings are available in various series and configurations, such as flanged bushings and split bearings, to meet specific application requirements.
Metal-Polymer Anti-Friction Plain Bearings
Metal-Polymer Composite Self-lubricating Bushing Material
Steel Back + Porous Bronze Sinter + PTFE
