Cam-guided lifting mechanism for bottles.

Piston rings are used to swing the fork.

Linear bearings are used for CAM – guided linear motion.

Used for bottle clip opening and closing.

The piston ring is used to control the linear motion of the valve.

CNC machine tools can always be more complex, more accurate and faster to execute programs.Digital applications not only guarantee quality and ease of operation, but also extend service life.

In the application of rotary automatic production line, the fabric is woven with corks, aluminum caps and wire;For encapsulating champagne bottles, machines for the food industry, the lubrication-free guide system is in the most prominent position, again, it is not sensitive to frequent cleaning and chemicals.No lubrication and wear resistance

Bearing materials can be marked by their particularity, such as low friction coefficient, chemical resistance and low hygroscopic performance during dry operation. These bearings are most suitable for application in high-tech beverage bottling plants. 

All bearings shall operate without lubrication and with low wear.The material must be able to withstand the effects of all chemicals used in the food industry.Lift speed up to 70 mm/ SEC, that is, 70 mm per second of travel.All sleeves must be safe in the axial direction.Sleeve must be flushable.

In this application, self-lubricating bearings replace lubricated ball bearings.It can also extend the service life of the product while saving great cost.Other advantages for consumers include corrosion resistance and maintenance free.

Detection system: label or bottle detection

Detection: camera box adjustment

The self-lubricating bearing linear system is used to detect camera movement in the X and Z directions (label detection).

The self-lubricating sliding bearing is used for the spindle support of the rotating transfer disk and the opening and closing of the bottle clip

Self-lubricating sliding bearings are used to clean the chain.

Reducing the energy consumption of the bottle washing machine is an important effect of using self-lubricating bearings.This was achieved under the most difficult conditions with a corrosive soda solution of 2-3% at 80 °C.