Reliable One-Stop Bronze Bushings Solution Supplier, a wide range of unleaded tin bronze bushings
Split Steel Bushings | Bearing Service
Monometallic Bearing Material CuSn8 with Lubrication Indents
Provide high-quality bronze bushing types and self-lubricating bearing solutions for globe customers
Phosphor bronze bushings CUSN6 / CUSN8
Homogeneous Bronze Bearing Bushing Material (Cu 91,3%, Sn 8,5%, P 0,2%).The bearings are wrapped in a cold-formable, homogeneous bronze, which achieves exceptional material properties. The design of the flange enables the bearing to absorb axial loads.
APPLICATION: Mechanical handling and lifting equipment, hydraulic cylinders, pneumatic equipment, medical equipment, textile machinery, agricultural equipment, etc.
Selecting the Right Bronze Bushing, Monometallic material CuSn8, Wieland bushing Alternatives, replacement parts.
Wrapped Split Bronze Bushings is a bronze material for the matrix, processing uniform and orderly injection hole, the rolling made of thin-walled bearings, lubricating grease after assembly, and then configure the end face seal and use. The bearing has a large amount of oil, easy installation, the advantages of small size design, and can replace the use of copper sets, can greatly reduce costs.
At present the product has been used in conveyors, lifts, roll field machines, school-level machines, such as medium and low-speed occasions.
Wrapped Split Bronze Bushings from china www.viiplus.com are dry cylindrical compact and light bearings manufactured from the bronze CuSn8 strip that require no lubrication in operation.
BRONZE BEARINGS MADE OF CUSN8, Our range of CuSn8 bronze bushings (rolled phosphor bronze alloy material) is extremely versatile and well suited for a wide range of applications.
Bronze bearing is made of bronze with oil holes evenly distributed on it. When assembling it, the bearing should be lubricated with grease before both ends of the bearing is assembled with seals.FB092 has the advantages of abundant oil storage, easy-to-assemble, or easy to be machined, etc. It can substitute bushings made by complete copper material, in addition, it suits conditions of middle load and low speed including conveying machine. hoisting machine, windlass, aligning machine, etc.
Bronze Wrapped Bearing Bushings
Initial lubricating Self-lubricating bushing
Bronze Wrapped Bushing with Through Holes Conventional Lubrication bushing
Suitable for oil
These bearing bushings are wrapped from a cold-formed homogenous bronze (CuSn8), which can achieve exceptional material properties. According to various lubrication conditions, we can provide diamond shaped lubrication indents (grease) and incorporate holes (oil), these designs can rapidly build up a lubrication film at the start of the movement and thereafter reduce the running friction.
Base material
CuSn8P0.3 or CuSn6.5P0.1
Hardness
HB90~120
Temperature limit
-100℃~200℃
Load capacity
60N/mm²
Speed limit
2.5m/s
A Wide Range of Bronze Bushing From China
Phosphor bronze bushing is characterized as a very pure alloy with extremely low content of impurities.
ROLLED BRONZE BUSHES
Exporter of a wide range of bushing bearings which include homogeneous bronze (Cu 91,3%, sn 8,5%, p 0,2%) and brass hot rolled strips.
Standard sizes are equipped with diamond-shaped or lubrication oil holes on the bearing surface.
Metric bearings and imperial bushings made to order: Standard bushing forms in special sizes, half-bushings, stamped/deep drawn shapes, bearings with locating notches, lubricant holes and grooves, customized designs
Characteristics
Bearing material CuSn8 made of solid bronze strip with perforation for lubricated applications.
Good wear resistance, suitable for rough conditions.
Optimum performance under relatively high loads and low speeds.
These holes will allow greater capacity to collect lubricant, which build up a lubrication film at the start of movement and reduce the frication.
Design
Cylindrical bearings
Flanged bearings
Thrust washers
Plates
Drawing details
The properties of the brass bearing material together with the wrapping and calibration procedure make this type of bearing particularly suitable for structures that are subject to heavy loads and relatively slow movements.
Eliminate Lubricants :Eliminate lubrication with VIIPLUS maintenance-free dry bearings to improve your machine performance
Increase Service Life: Improve bearing service life with VIIPLUS high-performance plain bearings Improve Efficiency VIIPLUS self-lubricating PTFE bearings maximize the efficiency of your system Replace Roller Bearings :VIIPLUS plain bearings can replace the roller and needle bearings
Reduce Size / Weight :VIIPLUS Compact plain bearings reduce costs of shaft and housing surface Simplify Assembly :Get access to bushing bearing drawings
ASK FOR A QUOTE START YOUR PROJECT
With an Application Engineer
Explore more products
Introduction:
The bearings are wrapped in a cold-formable homogeneous bronze (CuSn8), which has exceptional material properties. The standard sizes have diamond-shaped lubrication grooves on the bearing surface. These recesses serve as a lubricant reservoir in order to quickly build up a lubricating film during the starting movement and thus reduce the starting friction. The material is suitable for constructions, agriculture, etc. where high loads and slow movements occur.
This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.
Newsletter
Sign-up to get the latest news and update information. Don't worry, we won't send spam!
Reviews
There are no reviews yet.