Metal & Bimetal – Bronze Bearings – Steel Bushings

Trusted & Reliable Plain Bearings & Bimetal Bushings

  • Bimetallic Material Steel+CuPb10Sn10

  • Bimetallic Material Steel+CuPb24Sn4

  • Bimetallic Material Steel+CuPb10

  • Bimetallic Material Steel+AISn20Cu

  • Bimetallic Material Steel+CuSn8Ni

CuPb24Sn4 (Copper, Lead, and Tin):

  • It has a high fatigue strength and bearing capacity.
  • Impact resistance,
  • Due to the high lead content in the alloy and high density, it is prone to lead segregation, which reduces the abrasion resistance of the bushing.
  • It may also reduce the strength of the combination of alloy layer and steel back.
  • The high-cost copper layer is used in high speed, swing, and rotating wages under bearing conditions.

CuPb10Sn10:

  • It has good lubrication performance, wear resistance, and corrosion resistance.
  • Suitable for medium to high speed and has a more significant impact on load-bearing.
  • The gasket surface pressure is high.
  • There is the lateral pressure of the sliding bearing, such as the bimetallic bearing shell, the piston pin set, lining, etc.

CuSn6Zn6Pb3 (Copper, Tin, Zinc, and Lead):

This material allows the bearing to work under general load and medium sliding speed, such as turbines, motors, compressors, piston clutches, connecting rod bushings, rocker arm bushings, and so on.

High-Performance Bimetal Bushing & Bearings Designed in Collaboration with Customers. Made for Your Needs. Speak to an Engineer to Learn More about Our Custom, High-Quality Bearings. Bi-metallic bushing is formed from steel strips with alloy lining material. The alloy lined surface can be machined oil grooves, holes, formed Indentations etc according to different application. It is suitable for high load, lower speed oscillation & rotation movement.

Save Cost 100%

“Long-lasting, Bimetal Lubricated Bearings!”

Experienced Manufacturer

Manufacturing Sliding Bearing

Bimetal lubricated bearings

  • Bimetal bearings, is low-carbon steel substrate

  • Bimetal bearing is a lead-free environment-friendly.

  • Dual-metal bearings, is based on steel substrate

  • high tin aluminum bearing, Steel substrate, the surface roll ...

Discuss your project with a custom parts expert

Request a bimetal bearing prototype!

Bimetallic composite bearings to high-quality low-carbon steel substrate, the surface of the sintered copper alloy having a low friction characteristics (CuPb10Sn10, CuPb6Sn6Zn3, CuPb24Sn4, CuPb30, AlSn20Cu, CuSn8Ni) as bearing wear layer, copper alloy surface may need to use conditions processing various types of sump hole, oil hole, so as to not be suitable for continuous refueling refueling or difficult situations.

Also available with sleeve bushing & flange bushing.

Bimetal Material Designs and variants

Quality, Well-made Bearings and Bushings. View Our Products. Get A Quote Today. 100% Quality Guaranteed. Worldwide On-time Shipping. View Our Products. Contact Us Today. Extreme Stable & Durable. High-end Production Lines. 100% Quality Guaranteed.

PROVEN INTEGRITY. DELIVERING VALUE.

Bimetal lubricated bearings

Quality, Well-made Bearings and Bushings. View Our Products. Get A Quote Today. High Quality Guaranteed. Worldwide On-time Shipping. View Our Products. Contact Us Today. Extreme Stable & Durable. Bimetal lubricated Bearings.

  • Technical data

    Dynamic load 100P N/mm² Maximum temperature Grease lubrication 150°C
    Line speed Grease lubrication —— Fluid lubrication 250°C
    Maximum PV value —— Matching shaft diameter Hardness ≥270
    Coefficient of friction —— Roughness 0.16~0.63
    Line speed Fluid lubrication 15 Alloy layer hardness 30~45
    Maximum PV value 8 Thermal Conductivity 60W/mk
    Coefficient of friction 0.04~0.12 Coefficient of linear expansion (axial) 19×10-6/K

    Inner hole and non-machinable thickness tolerance

    Nominal thickness
    Normal Thickness
    Inner hole non-machinable thickness tolerance
    Tolerances of Series B (non-machinable)
    Machinable thickness tolerance of inner hole
    Tolerances of Series C (non-machinable)
    1.0 -0.025 +0.25
    +0.15
    2.0 -0.030 +0.25
    +0.15
    2.5 -0.035 +0.25
    +0.15
    3.0 -0.040 +0.30
    +0.15
    3.5 -0.045 +0.30
    +0.15
    3.5 -0.050 +0.30
    +0.15
  • Bimetal Buckle Type

  • Bimetal Oil Pocket Type

  • Bimetal Bearing & Bushing Application

    Engineering machinery: chassis travel agencies bearing wheels, towing wheel sleeve, tension wheel hub;
    Automotive industry: balance shaft bushings, steel pin bushings, steering shaft main Shaw sleeve, connecting rod sleeve, valve rocker sleeve, camshaft sleeve, differential bushings, gearbox bushings, internal combustion engine main bearing, Thrust washer;
    As well as the side of the piston pump, gear pump side pieces.

FIND A BIMETAL BEARINGS

*Standard- alloy Bimetal Bearings

Lead-free bimetal bearing is an environmentally friendly bimetal bearing with high fatigue strength and bearing capacity, and can replace lead-containing bimetal bearings or copper sleeves.

  • Experienced Manufacturer

    Manufacturing Sliding Bearing

  • Bimetallic Strip Supplier - Aluminum Stainless Steel

Custom Bimetal Bushing

As a manufacturer, we produce almost all possible dimensions. Cost-Effective Prices.

A bimetallic strip is used to convert a temperature change into mechanical displacement. Excellent wear/high temperature/corrosion resistance, process ability, get quote. Save cost.

bimetal bearings
bimetal bushings (4)

Discuss your project with a custom parts expert

Request a custom bimetal bearing prototype!

The bimetal bearing is a product based on a steel plate with a surface sintered CuPb30 material. Can be used as high-speed, rocker bushings; oil and mercury side friction plates.

Also available with different alloy

Bimetal Bushings & Bearings

Bimetal bearings are based on low carbon steel plate as the base material, and are the strongest bearing capacity of bushing bearings. They are used in the balance bridge bushings and gaskets of heavy vehicles. It is a widely used high-load low-speed sliding bearing.

Experienced Manufacturer, Manufacturing Bimetal Bearing.

Guide bushes & thrust washers

The right Oilless Metal Sliding Materials for Your Markets!

Offers over bearing bushings materials designed for wear resistance. Whether your application is exposed to, The production process from at starts as soon as your order is received.

  • Oilless Metals Bearings, We Meet Stringent Client Demands Serving a Wide range of Equipment. Submit an inquiry!

  • The goods are made ready to ship and delivered as quickly as possible.