Projects
Make your space useful and different
Experience of over 10 years of successful projects on creating unique and modern interior designs all over the world.
Learn More
Plain Bearing
Your online source for split bushing sleeve!
Whatever you need in bronze bushings and split bushings, we produce a wide range of bearing types, from flanged bushings, bronze sleeves and bronze thrust washers. We manufacture from wrapped bronze bushing or PTFE composite bushing in all standard size and many custom sleeve bushing, as well as sliding bearings. We offer a broad range of options to suit any requirement.
High Quality
The promise of split bushing sleeve high quality, meet your requirement.
Split Bushing Sleeve
Small minimum order value & quantity, fast delivery.
We offer our customers not only simply plain bushes.
OILLESS SLIDING BEARING BUSH EASY SOURCING lubricated
Save your purchasing graphite plugged bronze bushings budget for your project. Copper alloy inlaid solid lubricant self-lubricating bearings combine the wear resistance of copper alloy and the self-lubricating performance of solid lubricant, making them maintenance-free during use with oil. The products are widely used in high load, intermittent or oscillating motion, such as steam locomotive production lines, hydraulic turbines, reservoir working/accident doors, plastic machinery, punching machine peripheral equipment, etc. Various types of copper alloys are available depending on the operating conditions used.
Dry Sliding Bearing, Split Sliding Sleeve Bushing Composite POM Material
Composite bushing, POM bushing steel backed, Maintenance-free, Boundary lubrication bearing is filled with POM composite materia for the surface layer of the three-layer composite self-lubricating material, it is a benign boundary lubrication material, so it is particularly suitable for high load and low speed under the rotary motion, swing motion and often under load opening and closing and not easy to form hydrodynamic lubrication of bearings, thrust washers, sliders, ball seats and other friction parts. PO can fully utilize the trace grease, in the boundary Under the condition of boundary lubrication lubrication, it can be maintained without oil for a long time. Under the condition of completely oil-free lubrication, POM BUSHING has lower friction performance and allowable PV value, so it is usually rolled out on the plastic surface with oil storage pits and coated with lithium-based lubricating grease or silicone grease during assembly.
Split Bushing Sleeve , Bimetal Bearing Service
Split bushing sleeve are utilized to reduce friction on the shaft and utilize a thin cross section. The split in the material allows for ease of installation of the bushing. Split steel bushings are available pre-lubricated or self lubricated. They often take the place of larger, more expensive machined bronze or powdered metal bushings that often require re-lubrication and oil grooving. Structural characteristics and applications. JF bimetallic composite bearings are made of high quality low carbon steel as the substrate and sintered copper alloy with low friction characteristics (CuSn6.5P0.1, CuPb10Sn10, CuSn8Ni, CuPb24Sn4, AlSn20Cu) as the wear-resistant layer of the bearing, and the surface of the copper alloy can be processed with various types of oil grooves, oil holes, oil cavities, etc. according to the needs of the working conditions to suit The surface of the copper alloy can be machined with various types of oil grooves, oil holes, oil cavities, etc., according to the operating conditions, so as to be suitable for applications where continuous oiling is impossible or difficult. The material can be sintered and extruded twice to obtain good joint strength and optimum load-bearing capacity.
