Self-lubricant graphite sliding plate & wear plate. Start Sourcing. Wear Plate, Brass Bearing with Embedded Solid Lubricant

The copper-based inlaid self-lubricating slide plate is on the base of high-force brass. A high-performance solid lubrication product inlaid with graphite or MoS2 solid lubricant. It breaks through the limitation of general bearing relying on oil film lubrication. In the process of use, the solid lubrication and shaft friction through frictional heat, form the excellent conditions of oil and powder coexistence lubrication, not only to protect the shaft from wear but also to make the solid lubrication characteristics eternal. Its hardness is twice as high as the general copper bushing, and its wear resistance is twice as high.
Application scope】
At present, the product has been used in a metallurgical continuous casting machine, train support, rolling equipment, mining machinery, ships, gas turbines, and other high temperature, high load, low-speed heavy load, and other occasions.
【Main parameters】 Sliding bearing
Substrate material: CuZn25A16Fe3Mn3
Limit dynamic load: 100N/mm2
Basic hardness: HB210~270

Maintenance-free, long service life STW48-75/100/125/150mm metric size self-lubricating bronze oil-free plate 28 38 58 200 Oil-free mold wear plate copper slider, Self-lubricating slider guide plate 10 thick STW/STWT high strength brass graphite block inserts
The material is high force brass, and the embedded solid lubricant mainly uses artificial graphite and PTFE as the solid lubricant. Wear plate graphite parts supplier, offer immediate delivery, technical assistance, competitive prices. Our experts are ready to help you find the right solution for your specific application.

• STW28-75
• STW28-100
• STW28-125
• STW28-150
• STW38-75
• STW38-100
• STW38-125
• STW38-150
• STW48-75
• STW48-100
• STW48-125
• STW48-200
• STW58-75
• STW58–100
• STW58-125
• STW58-150
• STW58-200
• STW75-75
• STW75-100
• STW75-125
• STW75-150
• STW75-200
• STW100-100
• Custom Self lubricant graphite sliding plate

Solid lubricated plates are especially suitable for no oil, high temperature, high load, low speed, anti-fouling, anti-corrosion, anti-radiation, as well as in water or vacuum solution infiltration and can not add lubricating film under special conditions.

Brass Bearing with Embedded graphite Plate Features:

1. Can work continuously under the condition of no oil lubrication.

2. More suitable for heavy load and low-speed conditions, with good wear resistance and very low friction coefficient.

3. Suitable for reciprocating, rotating, and intermittent motion where oil film is difficult to form.

4. With corrosion resistance and chemical resistance.

5. Suitable for -40℃+300℃ temperature range.

6. Maintenance-free, long service life.